Intelligent Power Distribution 
Power Supply DC 
EMC Suppressors 
Transformers 
UPS-Systems / Buffer- / Redundancy Modules 
Converters / Rectifiers 
Optocouplers / Semiconductors 
Active Interface Technology 
Passive Interface Technology 
Eurocard Holders / Control Modules 
Control Cabinet Power Outlets 
EMC Filters 
Safety relay 
Relay Modules 
Switches 
Front Panel Interfaces 
Control Cabinet Interfaces 
Pass-through 
Lighting Elements 
Control Devices 
Modular Connection Systems (Modlink Vario) 
Heavy Duty Connectors (Modlink Heavy) 
Cable entry systems 
With open ended wires 
Connection cables 
Y connector 
Valve Connectors 
Field-wireable 
T-coupler 
Flange Connectors 
Bulk cable 
Adapter 
Tool 
Accessories 
Cube67 
Cube20 
Cube20S 
xtremeDB 
IO-Link Devices 
Connectivity Solutions for Cameras 
MVK Metal 
Impact67 
Impact20 
MASI 
M8 Distribution Systems 
M12 Distribution Systems 
M12 male 90° A-cod. Push-Lock
5-pol., 0,14 - 0,75mm², 4 - 8mm
| Art.No.: | 7000-13911-0000000 |
| Weight: | 0.023 kg |
| Country of origin: | DE |
Description
Male 90°
M12, 5-pole
A-coded
Push-Lock spring clamp connection
Sealing range (cable Ø): 4...8 mm
Plastic housings with good resistance against chemicals and oils.
The resistance to aggressive media should be individually tested for your application. Further details on request.
M12, 5-pole
A-coded
Push-Lock spring clamp connection
Sealing range (cable Ø): 4...8 mm
Plastic housings with good resistance against chemicals and oils.
The resistance to aggressive media should be individually tested for your application. Further details on request.
Technical Data
Side 1
| Tightening torque | 0,4 Nm |
|---|---|
| Family construction form | M12 |
| Thread | M12 x 1 |
| Material contact | Bronze |
| Degree of protection (EN IEC 60529) | IP65, IP67 |
Electrical data | Supply
| Operating voltage AC | 48 V |
|---|---|
| Operating voltage DC | 60 V |
| Operating voltage AC max. (UL-listed) | 250 V |
| Current operating per contact (UL) | 4 A |
| Operating current per contact max. (40°C) | 4 A |
Installation
| Connection cross section min. | 0,14 mm² |
|---|---|
| Connection cross section max. | 0,75 mm² |
| Cross section connection with wire end ferrule min. | 0,08 mm² |
| Cross section connection with wire end ferrule max. | 0,5 mm² |
| Cross section connection without wire end ferrule min. | 0,14 mm² |
| Cross section connection without wire end ferrule max. | 0,75 mm² |
| Cross section connection with wire end ferrule AWG min. | 28 AWG |
| Cross section connection with wire end ferrule AWG max. | 20 AWG |
| Cross section connection without wire end ferrule AWG min. | 26 AWG |
| Cross section connection without wire end ferrule AWG max. | 18 AWG |
Installation | Connection
| Connection information | Push-Lock spring clamp connection |
|---|---|
| Width across flats | SW18 |
| Mating cycles min. | 100 |
Installation | Pin assignment
| Coding | A |
|---|
Device protection | Electrical
| Additional condition protection degree | inserted, screwed |
|---|---|
| Pollution Degree | 3 |
| Insulation resistance min. | 100 MΩ |
| Overvoltage category (EN 60950-1) | II |
Mechanical data | Material data
| Coating contact | gold plated |
|---|---|
| Material gasket | NBR |
| Material housing | PA |
Mechanical data | Mounting data
| Mounting method | inserted, screwed, Shaking protection |
|---|---|
| Clamping range min. | 4 mm |
| Clamping range max. | 8 mm |
Environmental characteristics | Climatic
| Operating temperature min. | -40 °C |
|---|---|
| Operating temperature max. | 85 °C |
Conformity
| Product standard | DIN EN 61076-2-101 (M12) |
|---|
Commercial data
| ECLASS-6.0 | 27279221 |
|---|---|
| ECLASS-7.0 | 27440104 |
| ECLASS-8.0 | 27440104 |
| ECLASS-9.0 | 27440102 |
| ETIM-5.0 | EC002635 |
| customs tariff number | 85366990 |
| GTIN | 4065909028933 |
| Packaging unit | 1 |
